MIL‐DTL‐3241F
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-22
- Welded Joint Design
MIL-STD-1907 - Inspection, Liquid Penetrant and Magnetic Particle, Soundness Requirements for
Materials, Parts and Weldments
MIL-STD-13231 Markings of Electronic Items
(Copies of these documents are available online at https://assist.daps.dla.mil or from the Standardization
Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government Documents, Drawings, and Publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein.
Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
US ARMY COMMUNICATIONS & ELECTRONICS MATERIAL READINESS COMMAND DRAWINDS
SC-F-639
- Reel DR-5( ), Assembly
SC-F-5697
- Reel DR-7( ), Assembly
SC-DL-90889 - Reel DR-8( ), Drawing and Data List
SC-DL-621036 - Reel RL-159( )/U, Drawing and Data list
DL-A-3003198 - Reel RC-453( )/G, Drawing and Data list
(Copies of these documents are available from US Army Communications & Electronics Material
Readiness Command, 12 WD Bldg 601 Mcafee Ctr, Fort Monmouth, NJ 07703.)
2.3 Non-Government publications. The following documents form a part of this specification to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4 - Sampling Procedures and Tables for Inspection by Attributes
(Copies of this document are available from www.asq.org or the American Society for Quality, 611 East
Wisconsin Avenue, Milwaukee, WI 53202.)
ASTM INTERNATIONAL
ASTM E8/E8M - Standard Test Methods for Tension Testing of Metallic Materials
ASTM E10
- Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E18
- Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E1444
- Standard Practice for Magnetic Particle Testing
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr Harbor
Drive, PO Box C700, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this specification and the references cited herein, the text of this specification takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 CONSTRUCTION. Each reel shall be fabricated in accordance with the applicable drawing listed
below and with performance characteristics contained herein:
Reel DR-5 ( )
-SC-F-639
Reel DR-7 ( )
-SC-F-5697
Reel DR-8( )
-SC-DL-90889
Reel DR-159( )/U
-SC-DL-621036
Reel RC-453( )/G
-DL-A-3003198
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business